Volvo 900 Series Guides, Photos and Videos

The Volvo 900 Series is a range of executive cars produced by the Swedish manufacturer Volvo Cars from 1990 to 1998. The 900 Series was introduced in 1990 to replace the 700 Series from which it derived. Prior to the end of its production, the 960 was renamed as the Volvo S90 (saloon) and Volvo V90 (estate), and the 940 was renamed 940 Classic, becoming the last rear-wheel-drive cars from Volvo.

Visible differences between the 700 and the 900 Series included redesigned rear styling of the saloon models (late 700 estates and early 900 estates are visually identical). The 960 was introduced in 1991 along with a new family of modular engines, and then was substantially revised for the 1995 model year, improving the handling. The range was first augmented and finally supplanted by the Volvo 850 in 1993, with the last of the 900s being sold in 1998. Some 900 Series were built as chassis for ambulances and hearses after the main production run had been completed.

The Volvo 940 is among the last in the long-running line of large rear-wheel drive cars from Volvo.

Introduced in September 1990, the 940 was essentially a cosmetic reskin of the 740. All drivetrains, and most options available in the 940 had been available in the 740, with the exception of the 780 Coupé. The 940 was more closely related to the 740 than the 760, sharing the same dashboard, drivetrain choices, and sheet metal from the A-pillar forward. In contrast, the 960 was an evolution of the 760. The 760 / 960 front sheet metal, independent rear suspension, dashboard, and other interior features were all exclusive to the two upscale models. The estate, introduced in May 1991, was even harder to tell apart from its 745 predecessor.

The engines remained largely the same as for the 740, with 8-valve 2-litre (B200) and 2.3-litre (B230) four cylinder gasoline engines, either naturally aspirated or turbocharged, as well as the familiar 2.4-litre Volkswagen six-cylinder diesel and turbodiesels being fitted. There were also 16-valve versions of the gasoline engines fitted on a few early models (B204, B234, naturally aspirated). In 1994, gasoline engine range was limited to 2.3 engines, but the 2.0 turbocharged remained available in some markets with tight tax limits, such as Italy, Belgium, and Portugal. An interesting version added in 1994 was a low-pressure turbocharged version of the B230 – maximum power was only up slightly, from 131 to 135 PS (96 to 99 kW), but torque increased throughout the range and the car suffered from virtually no turbo lag because of the small size of the charger. The 155 PS (114 kW) turbocharged 2.0 was first presented in February 1991, originally intended for Italy and other such markets it was later also installed in the British market 940 SE. Eventually, the most commonly found engines on 940's were the naturally aspirated B230FB/131PS (all markets but US), B230FD/115PS (mainly for the US market), the turbocharged B230FK/135PS, B230FT/165PS, B200FT/155PS (for some markets) and the D24TIC/122PS diesel engine.

Engines were fitted with either a 5-speed or 4-speed+overdrive manual gearbox M46/M47 or an automatic transmission, either Aisin-Warner AW10/71/72 (3-speed+overdrive) or ZF 4HP22 (4-speed) for some B230FB (or E) and diesel engines. In 1995, the manual gearbox was replaced with a full 5-speed (M90), and the ZF was abandoned for gasoline engines and fitted only on diesels.

The SE badge was one of the more confusing badges. In the US, the 940 SE was in fact a 960 Turbo with the four-cylinder B230FT engine, the 940 SE badge presumably chosen by Volvo in order to maintain the link between name and number of cylinders. In Sweden, the 940 SE was an ordinary non-turbo 940 with some optional extras as standard, most notably painted mirrors and bumpers. In the UK, the 940 SE was a 2.3-litre Turbo B230FT with some extras as standard. In Thailand the 940 SE was a Turbo (LPT) model with leather seats, ABS brakes and SRS Airbag.

From MY 1993 on, in Italy all 940 estates were badged "Polar" (engine B200F) or "Super Polar" (engine B200FT).In the end of the model cycle, certain countries (as Sweden, Germany and Switzerland) had a well equipped special series badged "Classic". The 940 production extended from 1990 to 1998.

In the United States, the 1991 940 was offered in three versions: the 940GLE used a DOHC 16-valve version of the 2.3-litre engine (B234) with a 6,000 rpm redline. The 940 Turbo used a turbocharged 2.3-litre engine (B230FT), and the top-end 940SE (turbo) included body-coloured trim, and the premium features (leather, power seats/moonroof, etc.) as standard equipment.

This is one of the Volvo vehicles that was produced at Volvo's former manufacturing facility in Halifax, Nova Scotia. In 1993, 940s built at that plant were affixed with roundels at the rear window, to celebrate the plant's 30th anniversary.

In 1991, the 940 GLE was downgraded with a 114 bhp 2.3-litre 4-cylinder engine and sold as the 940 GL (or basic 940 in some export markets). The 940 SE was in actuality a 960 Turbo sold as the 940 SE, while the 940 Turbo remained largely unchanged. US-sales ended in 1995 in favour of the Volvo 850 and Volvo 960 series. Production of the 940 Series ended on 5 February 1998.

Autumn of 1990 marked the launch of the Volvo 960 in time for the 1991 model year. This was the replacement for the 760. The 1991 960 was an evolutionary progression of the 1990 760, but it was also one of the first cars to feature the work of British designer Peter Horbury.

The most significant change was that, in most markets, the 960 was offered with an all-new aluminium 24-valve DOHC inline six-cylinder engine, often referred to as "white block" in the Volvo community due to its bare aluminium block. Maximum power was 201 hp (150 kW) at 6,000 rpm. Some markets, such as Australia and Japan, saw 1991 960s equipped with the same B280E/F V6 engine (143 hp or 107 kW at 5,100 rpm) that had powered the 1990 760. The 1992 model year saw the U.S. introduction of the DOHC inline six-cylinder engine. For the Italian and Portuguese markets, the 960 was available with the 16v 2-litre turbo (187/197 hp, 140/147 kW) from September 1990 until September 1993 along with the inline sixes. Certain markets also received the 2.3-litre turbo 'Redblock' four, with 121 hp (90 kW) and the Volkswagen built D24TIC with 114 or 120 hp (85 or 89 kW).

The 960 received incremental changes for the 1992, 1993, and 1994 model years. Most visible were the new more shapely seats, and redesigned seat-belts with hydraulic pretensioners for 1992. 1993 saw a new more ergonomic shifter, and in 1994 dual front airbags were introduced in some markets. The opaque sunroof was replaced by a sliding sunshade and glass window. In 1994, the US version of the 3-litre six was tuned for more torque and a less peaky power delivery in favor of U.S. emissions regulations, with 178 hp (133 kW) at 5,200 rpm and 270 N⋅m (199 lb⋅ft) at 4,100 rpm (as opposed to 267 N⋅m or 197 lb⋅ft at 4,300 rpm for the rest of the world).

A small coachbuilder in Laholm, Sweden, called Nilsson, worked under contract with Volvo to supply the stretched 960 Executive (and later Royal model, with Hermes leather interior). Nilsson provided a number of different lengths and sealed the window in the c-pillar, for more privacy in the rear. The Executive had longer rear doors, longer versions had inserts behind the b-pillar.

For North America, the 1992–1994 Volvo 960s were built in Kalmar, Sweden. The very first Volvo 960 for the US-market rolled off the assembly line on August 12, 1991 as a 1992 model. The 1995 to 1998 960s were built in Göteborg, Sweden. The first 1995 model year (facelift) 960 was built on June 27, 1994.

In 1994 (for the 1995 model year) the 960 received a facelift, including changes to the grille and body-coloured panels. A smaller 2.5 version of the six-cylinder (2,473 cc) was also added to the lineup, with 170 or 163 PS (125 or 120 kW) for the B6244FS version.

Only the modular six-cylinder engines were available from model year 1995 on. The front suspension was redesigned to more closely match that of the 850. The rear suspension received a completely redesigned multi-link independent system with a single fibreglass transverse leaf spring. The 1995 estate received independent rear suspension. Volvo reported that the single composite leaf spring used in the rear suspension of the 960 estate had the same mass as just one of the two springs it replaced. Boge's Nivomat self-leveling rear suspension system became an option rather than standard equipment.

Trim levels were GLT and SE for European markets.

From 1996, Volvo renamed the 960 in select markets as Volvo S90 (saloon) and Volvo V90 (estate) in alignment with the letter-and-number naming scheme used on their other models. This renaming applied to several European countries in late 1996, in North America from late 1996 for the 1997 model year, and in Australia from March 1997. The new name coincided with an improved air conditioning system.

Complete article available at this page.