Willys MB Specifications, Photos and Videos

The Willys MB and the Ford GPW, both formally called the U.S. Army Truck, ​1⁄4-ton, 4×4, Command Reconnaissance, commonly known as Jeep or jeep, and sometimes referred to as G503,[nb 3] were highly successful off-road capable, light, military utility vehicles, built in large numbers to a standardized design, from 1941 to 1945, for the Allied forces in World War II.

The jeep became the primary light wheeled transport vehicle of the United States Military and its Allies in World War II, as well as the postwar period, with President Eisenhower once calling it, "one of three decisive weapons the U.S. had during WWII." It was also the world's first mass-produced four-wheel drive car, manufactured in six-figure numbers. About 650,000 units were built, constituting a quarter of the total U.S. non-combat motor vehicles produced during the war, and almost two-thirds of the 988,000 light vehicle class produced, together with the Dodge WC series, outnumbering those by almost two to one. Large numbers of jeeps were provided to the U.S.' allies, including Russia at the time — aside from large amounts of 1​1⁄2- and 2​1⁄2-ton trucks, some 50,000 jeeps and 25,000 ​3⁄4-tons were provided to Russia during WW II — more than Nazi Germany's combined total production of their Volkswagen vehicles, the Kübelwagen and the Schwimmwagen.

Author Charles K. Hyde wrote: "In many respects, the jeep became the iconic vehicle of World War II, with an almost mythological reputation of toughness, durability, and versatility." Not only did it become the workhorse of the American military, as it replaced the use of horses and other draft animals (still heavily used in World War I) in every role, from cavalry units to supply trains, but improvised field modifications also made the jeep capable of just about any other function GIs could think of.

The jeep was considered such a valuable piece of equipment that General Eisenhower wrote that most senior officers regarded it as "one of the six most vital" U.S. vehicles to win the war.[nb 4] Moreover, General George Marshall called the squared-off little car "America's greatest contribution to modern warfare." In 1991, the MB Jeep was designated an "International Historic Mechanical Engineering Landmark" by the American Society of Mechanical Engineers.

After WWII, the original jeep continued to serve, in the Korean War and other conflicts, until it was updated in the form of the M38 Willys MC and M38A1 Willys MD (in 1949 and 1952 respectively), and received a complete redesign by Ford in the form of the 1960-introduced M151 jeep. Its influence, however, was much greater than that—manufacturers around the world began building jeeps and similar designs, either under license or not—at first primarily for military purposes, but later also for the civilian market. Willys trademarked the "Jeep" name, turned the MB into the civilian Jeep CJ models, and Jeep became its own brand. The 1945 Willys Jeep was the world's first mass-produced civilian four-wheel drive car.

The success of the jeep inspired both an entire category of recreational 4WDs and SUVs, making "four-wheel drive" a household term, and numerous incarnations of military light utility vehicles. In 2010, the American Enterprise Institute called the jeep "one of the most influential designs in automotive history", and its "sardine tin on wheels" silhouette perhaps even more instantly recognizable than the VW Beetle.

The design of the World War II jeep was the result of a long process, involving the contributions of both U.S. military officers and civilian engineers. The idea of the jeep originated with the infantry, which needed a low, powerful vehicle with four-wheel drive — the latter were mostly tied to three companies: Bantam, Willys and Ford, and the development has repeatedly been called a "design by committee". In fall 1941, Lt. E.P. Hogan of the U.S. Quartermaster Corps wrote: "Credit for the original design of the Army's truck ​1⁄4-ton, 4×4, may not be claimed by any single individual or manufacturer. This vehicle is the result of much research and many tests." Hogan credited both military and civilian engineers, especially those working at the Holabird Quartermaster Depot.

Advances in early-20th century technology resulted in widespread mechanisation of the military during World War I. The United States Army deployed thousands of motor vehicles in that war, including some 12,800 Dodges, and thousands of four-wheel drive trucks: Jeffery / Nash Quads, and trucks from the Four Wheel Drive Auto Company (FWD). General John Pershing viewed horses and mules as acceptable for the previous three U.S. wars, but in the new century, his cavalry forces had to move quicker, with more range and more personnel.

Immediately after World War I, the use of motor vehicles in that war was considered only a prelude to much greater application in future armed conflicts. As early as 1919, the US Quartermaster Corps recommended the acquisition of a new kind of military vehicle, ".. of light weight and compact size, with a low silhouette and high ground clearance, and possess the ability to carry weapons and men over all sorts of rough terrain." The U.S. Army started looking for a small vehicle suited for reconnaissance and messaging, while at the same time searching for a light cross-country weapons carrier.

At the same time, there was a drive for standardization. By the end of World War I, U.S. forces overseas had a total of 216 makes and models of motor vehicles to operate, both foreign and domestic, and no good supply system to keep them running.

Various light motor vehicles were tested--at first motorcycles with and without sidecars, and some modified Ford Model Ts. In the early-1930s, the U.S. Army experimented with a bantam weight "midget truck" for scouts and raiders – a 1,050-pound, low-slung car with a compact pick-up body was shown in a 1933 article in Popular Mechanics magazine. After 1935, when the U.S. Congress declared World War I vehicles obsolete, procurement for "remotorization of the Army" gained more traction.In 1937 Marmon-Herrington presented five 4×4 Fords, and American Bantam delivered three Austin roadsters in 1938.

Meanwhile, in Asia and the Pacific, Japan had already invaded Manchuria in 1931, and was warring with China from 1937. Its Imperial Army used a small, three-man crew, four-wheel drive car for reconnaissance and troop movements, the Kurogane Type 95, introduced in 1936.

By 1939 the army began standardizing its general-purpose truck chassis types by payload rating, initially in five classes from ​1⁄2-ton to 7​1⁄2-ton, but in 1940 the categories were revised. For the first time, a quarter-ton truck chassis class was introduced, at the bottom of the range, and the ​1⁄2-ton category was supplanted by a ​3⁄4-ton chassis.

By the eve of World War II, the United States Department of War had determined it needed a ​1⁄4-ton, cross-country reconnaissance vehicle. Although ​1⁄2-ton four-by-fours had outperformed ​1 1⁄2-ton 4x4 trucks during testing in 1938, the half-ton 4x4 trucks – both from Marmon-Herrington Ford, and the 1940 Dodge VC series – still proved too large and heavy, and insufficiently agile off-road. Anxious to have a quarter-ton truck in time for America's entry into World War II, the U.S. Army solicited proposals from domestic automobile manufacturers. Recognizing the need to create standard specifications, the Army formalized its requirements on July 11, 1940, and submitted them to 135 U.S. automotive manufacturers.

By now the war was under way in Europe, so the Army's need was urgent and demanding: Bids were to be received by July 22, a span of just eleven days. Manufacturers were given 49 days to submit their first prototype and 75 days for completion of 70 test vehicles. The Army's Ordnance Technical Committee specifications were equally stringent: the vehicle would be four-wheel drive, have a crew of three on a wheelbase of no more than 75 in (191 cm), later upped to 80 in (203 cm), and track no more than 47 in (119 cm), feature a fold-down windshield, carry a 660 lb (299 kg) payload, and be powered by an engine capable of 85 lb⋅ft (115 N⋅m) of torque. The most daunting demand, however, was an empty weight of no more than 1,300 lb (590 kg).

Initially, only American Bantam and Willys-Overland entered the competition. Ford joined later. Although Willys was the low bidder, Willys was penalized for requesting more time, and Bantam received the contract, as the only company committing to deliver a pilot model in 49 days and production examples in 75. Bantam's chief engineer, Harold Crist, who had previously worked on the first Duesenberg, and been an engineer at Stutz Motor Company of Indianapolis for 18 years, drafted freelance Detroit designer Karl Probst to collaborate. Probst turned down Bantam initially, but agreed to an Army request and began work on July 17, 1940.

Probst laid out full design drawings for the Bantam prototype, known as the Bantam Reconnaissance Car, or BRC, in just two days, and worked up a cost estimate the next day. Bantam's bid was submitted, complete with blueprints, on July 22. To save time, the vehicle was put together using commercial off-the-shelf components as much as possible. Bantam adapted body stampings from its car line: the hood, cowl, dash, and curvy front fenders – and the engine was a 112 cu in (1.8 l) Continental four-cylinder engine making 45 horsepower and 86 lb⋅ft (117 N⋅m) of torque. Custom four-wheel drive train components were provided by Spicer.

Using off-the-shelf automotive parts where possible had partly enabled drawing up the blueprints quickly. By working backwards, Probst and Bantam's draftsmen converted what Crist and a few others had put together into drawings. The hand-built prototype was then completed in Butler, Pennsylvania, and driven to the Army vehicle test center at Camp Holabird, Maryland. It was delivered on September 23, 1940. The vehicle met all the Army's criteria except engine torque. The Bantam pilot (later also dubbed the "Blitz Buggy" or "Old Number One") presented Army officials with the first of what eventually evolved into the World War II U.S. military jeep.

As Bantam did not have the production capacity or fiscal resources to deliver on the scale needed by the War Department, the other two bidders, Ford and Willys, were encouraged to complete their own pilot models for testing. The contract for the new reconnaissance car was to be determined by trials. As testing of the Bantam prototype took place from September 27 to October 16, Ford and Willys technical representatives present at Holabird were given ample opportunity to study the vehicle's performance. In order to expedite production, the War Department forwarded the Bantam blueprints to Ford and Willys, claiming the government owned the design. Bantam did not dispute this move due to its precarious finances. By November 1940, Ford and Willys each submitted prototypes to compete with the Bantam in the Army's trials. The pilot models, the Willys "Quad" and the Ford "Pygmy", were similar and were joined in testing by Bantam's entry, now evolved into a Mark II called the "BRC 60".[nb 6][nb 7] By then the U.S. armed forces were under such pressure that all three cars were declared acceptable and orders for 1,500 units per company were given for field testing. At this time it was acknowledged the original weight limit (which even Bantam could not meet) was unrealistic, and it was raised to 2,160 lb (980 kg).

Complete article available at this page.