Hotchkiss H35 Guides, Photos and Videos

The Hotchkiss H35 or Char léger modèle 1935 H was a French cavalry tank developed prior to World War II. Despite having been designed from 1933 as a rather slow but well-armoured light infantry support tank, the type was initially rejected by the French Infantry because it proved difficult to steer while driving cross-country, and was instead adopted in 1936 by the French Cavalry.

From 1938 an improved version was produced with a stronger engine, the Char léger modèle 1935 H modifié 39, which from 1940 was also fitted with a longer, more powerful 37 mm gun. It was intended to make this improved variant the standard light tank, with at least four thousand produced to equip new armoured divisions of both the Cavalry and the Infantry, but due to the defeat of France in June 1940 total production of both subtypes was limited to about 1200 vehicles.

For the remainder of the war Germany and its allies used captured Hotchkiss tanks in several modifications.

In 1926 it had been decided to provide armour support to the regular infantry divisions by creating autonomous tank battalions equipped with a light and cheap infantry tank, a char d'accompagnement. For this role at first the Char D1 was developed which type however proved to be neither particularly light nor cheap. In 1933 the Hotchkiss company under its own initiative presented a plan to produce a lighter design—this was made possible by the application of the new technology to produce cast steel sections to construct an entire hull. On 30 June 1933 this proposal was approved by the Conseil Consultatif de l'Armement. On 2 August 1933 the specifications were made known: a weight of six tons and 30 mm armour protection all around. Three prototypes were ordered from Hotchkiss, but the entire French industry was also invited to provide alternative proposals for a nouveau char léger. This allowed the Renault company to beat Hotchkiss in delivering the first prototype, which later was developed into the Renault R35. On 18 January 1935 the first Hotchkiss prototype, not yet made of armour steel, was presented to the Commission d'Expérience du Matériel Automobile (CEMA) at Vincennes; it was a machine gun armed tankette without turret. It was tested until 4 March 1935, when it was replaced by the second identical prototype to be tested until 6 May. Both had to be rejected because new specifications had been made on 21 June 1934 that increased the desired armour thickness to 40 mm. On 27 June 1935 the commission approved the type on the provision that the necessary changes would be made. On 19 August the third prototype was delivered, equipped with a cast APX turret and featuring a redesigned hull; it was tested until 20 September and accepted. On 6 November 1935 a first order was made for 200 vehicles. Though it should have been completed between July 1936 and July 1937, the first production vehicle was in fact delivered on 12 September 1936. A first additional orders had already been made of 92 on 7 September 1936, to be completed in November 1937. A third one of 108 vehicles followed on 23 January 1937, to be completed in September 1938. These vehicles had the series number 40000 to 40400. By 1 January 1937 132 hulls had been produced. None of these had at that date yet been fitted with a turret.

The first series vehicle was again extensively and intensively tested until 4 December 1936. The testing soon showed that its handling qualities in terrain were unacceptably poor. It was simply impossible to safely steer the vehicle on a somewhat bumpy surface, posing an extreme danger to nearby friendly infantry. The Infantry therefore initially rejected any further procurement. Eventually, in 1937, it decided to accept only the last hundred tanks to equip just two battalions with the type: the 13e and 38e Bataillon de Chars de Combat.

For political reasons however stopping production of the tank was unacceptable. And so the first 300 vehicles of the production run were offered to the Cavalry, which was forced to accept them because it would not have been granted a budget for other tanks anyway. As the cavalry units would be making more use of the road network and of mounted infantry, its cross-country handling problem was of less consequence. The H 35 was, at 28 km/h (17 mph), also somewhat faster than the Renault R35, which was capable of 20 km/h, although in practice its average speed was lower than that of the R 35 because of its inferior gear box.

The Hotchkiss H35 was a small vehicle, 4.22 metres long, 1.95 m wide and 2.133 m tall and weighing 10.6–11.37 tonnes. The hull consisted of six cast armour sections, bolted together: the engine deck, the fighting compartment, the front of the hull, the back of the hull and two longitudinal sections left and right forming the bottom. The hull was made water-tight by cementing these sections together with Aslic, a product based on tar mixed with lime. The casting allowed for sloped armour, avoiding shot traps, to optimise the chance of deflection but the protection levels did not satisfy the Infantry. Maximum armour thickness was not the specified 40 mm but 34 mm. There were persistent quality problems, worsened by the fact that many subcontractors had to be used: at first the armour was made much too soft; when hardness was increased it became brittle and full of bubbles and hence weak spots.

There was a crew of two. The driver sat at the right front, behind a large cast double hatch and next to the combined gearbox and steering unit. Behind him was a round escape hatch in the bottom of the hull. Driving the vehicle was very hard work. The Hotchkiss lacked the Cleveland differential ("Cletrac") of its Renault competitor, and it responded unpredictably to direction adjustments. The brakes were little help in compensation: they were too weak, especially when driving down a slope. No less troublesome was the gearbox: it was difficult to engage the highest fifth gear and so the theoretical top speed of 27.8 km/h was rarely reached. There was one reverse gear. The inevitable rough handling of the tank by the driver resulted in much wear and tear. Mechanical reliability was poor.

The suspension consisted of three bogies per side—each formed of two bell cranks arranged as "scissors" with springs at the top. Each bogie carried two rubber-rimmed wheels. The first ten production vehicles, which can be considered as forming a separate preseries, had curved bogie sides; in later vehicles the bogies had straight sides. The bogies superficially resembled the R35 type, but used horizontal helical springs instead of rubber cylinders. The sprocket was at the front, the idler—which itself was sprung to automatically control tension—at the rear. There were two top rollers.

The rear of the hull formed an engine room, separated from the fighting compartment by a fireproof bulkhead. The tank was powered by a 78 hp six-cylinder 86 x 100 3485 cc engine which was on the left of the engine compartment. A 160-litre fuel tank on the right, combined with a twenty litres reserve reservoir, gave a range of 129 kilometres or eight hours on a varied terrain. The engine was cooled by a centrifugal pump. Also a cooling fan drew air through the radiator and was also expected to cool the fuel tank. The trench-crossing capacity was 1.8 metres, the wading capacity 85 centimetres. On hard soil a slope of 75% could be climbed, on soft soil of 55%. Maximum tilt was 50%. Clearance was thirty-seven centimetres.

The APX-R turret was the same standard type as used on the R35 and R40 tanks, made of 40 mm cast steel and armed with the short 37 mm SA 18 gun, which had a maximum armour penetration of only 23 mm (0.91 in). Traverse of the turret was with a handwheel. The commander sat in a saddle suspended from the turret.The tank carried about 100 rounds for the gun, and 2,400 rounds for the coaxial 7.5 mm Reibel machine gun – the 37 mm ammunition racked on the left hand side of the hull, the 7.5 mm ammunition on the right side in fifteen circular magazines with 150 rounds each; a final magazine was to be at the ready on the machine-gun itself. The turret had a rotating cupola with a PPL RX 180 P visor but there was no hatch in the cupola though its top could be lifted a bit for better ventilation. Apart from the cupola there were protected vision devices, a binocular periscope and diascopes, to the front beside the gun and to each side. For access there was a hatch at the back of the turret. When opened, the commander could sit on it for better observation, but this left him very vulnerable and slow to reach the gun. The alternative was to fight closed-up, observing through the vertical slits or the visor of the hatchless cupola. The Cavalry liked neither this arrangement nor the weak gun. The latter problem was lessened somewhat by enlarging the breech so that special rounds with a larger charge could be used. This increased muzzle velocity to about 600 m/s (2,000 ft/s) and maximum penetration to about 30 mm (1.2 in). Only a small part of the tanks with the Cavalry alone were modified however, because it greatly increased barrel wear. In the Spring of 1940 the original diascopes of the Chrétien type were gradually replaced with episcopes, offering more protection.

As the Cavalry wanted an even better top speed, it was decided to bring to fruition experiments already conducted from October 1936 to install a stronger engine. A new prototype was made in 1937, with a 120 hp instead of a 78 hp engine. The hull was enlarged, giving it a higher almost level engine deck, to accommodate it. The track and the suspension elements were improved, raising the weight to 12.1 tonnes. This improved type was faster, with a top speed of 36.5 km/h (22.6 mph), but also was much easier to drive. Therefore, it was first presented to the Commission d'Expérimentations de l'Infanterie on 31 January 1939 to see whether the original negative decision could be changed. The commission indeed accepted the type, the Char léger modèle 1935 H modifié 39; and it was decided on 18 February to let it succeed the original version from the 401st vehicle onwards, which was just as well as both in 1937 and 1938 an order had been made of 200 vehicles and production had already started, the total orders of the improved type thereafter being expanded to 900. The factory identifier however was Char léger Hotchkiss modèle 38 série D, its predecessor having been the série B. The designation has caused much confusion; this was still officially the same tank as the H35, only in a later variant. However even at the time, many began to refer to it as the 38 H or the 39 H.

The new subtype differed from the original one in having a raised and more angular engine deck (in later production vehicles with crosswise instead of longitudinal ventilation slits on the right side); a range decreased to 120 km; closed idler wheels; tracks two centimetres wider at 27 cm; metal instead of rubber wheel treads; a silencer directed to the back and larger, more reliable and effective, ventilators.

A modernisation programme was initiated in early 1940. This included besides the fitting of episcopes, tails and some radio sets, the gradual introduction of a longer L/35 37 mm SA38 gun with a much improved anti-tank capability (30 mm penetration at 1,000 m); about 350 vehicles were (re)built with the better gun, among them about fifty H35s. The new gun became standard on the production lines in April. Before that, the available new guns had, from January 1940, gradually been fitted to the tanks of platoon, company and battalion commanders; about half of the commander vehicles in Hotchkiss units were so modified. It had been intended to fit the longer gun to all vehicles during the second half of 1940. After the war it was wrongly assumed for a time that H38 was the official name of the tank with the new engine but without the new gun and that H39 was the name of the type that had both major improvements. H38 however, in contemporary use indicated the same type as H39 and it is only possible to refer to the latter with historical accuracy in an informal sense.

Parallel to the development of a R40 it was, for a time, considered to create an H40 by adopting the improved AMX suspension of the other vehicle; but this option was ultimately rejected.

In the Cavalry, the main user at first, the Hotchkiss tanks replaced as main combat tanks the light AMR 33 and AMR 35 vehicles, that for want of a better type had been used to form the bulk of the first two Cavalry armoured divisions. As the new medium SOMUA S35 was initially produced in very limited numbers, until early 1939 the Hotchkiss equipped three of the four divisional tank regiments.

In April 1940 the 342e CACC (Compagnie Autonome de Chars de Combat or "Independent Tank Company") was sent to Norway after the German invasion of that country, having first been intended to form part of an expeditionary force to assist Finland in the Winter War. This autonomous company, equipped with fifteen H39s, all with short guns, fought at Narvik, after having landed on 7 May. After the temporary liberation of that city, the twelve remaining vehicles were withdrawn to Britain on 8 June, where they exceptionally joined the Free French, forming the 1e Compagnie de Chars de Combat de la France Libre. In 1940 and 1941 this 1e CCC fought against Vichy troops in the Battle of Gabon and later in Syria.

According to the acceptance lists, when World War II started 640 Hotchkiss tanks had been delivered. The inventories deviate slightly: of the 300 H35s allocated to the Cavalry, 232 were fielded by ten cavalry squadrons, 44 were in depot, eight in factory overhaul and sixteen in North Africa. Of the hundred used by the Infantry, ninety were fielded by the two tank battalions equipped with the type, six were in matériel reserve and two used for driving training. Of the H39s, sixteen were used by the Cavalry in North Africa and six in depot; 180 were fielded by four Infantry tank battalions and fourteen were in the Infantry matériel reserve. It was decided to concentrate most Allied production capacity for light tanks into the manufacture of a single type, and the Hotchkiss tank was chosen as it had the necessary mobility to be of use in the many armoured divisions the Entente planned to raise for the expected decisive summer offensive of 1941. To this end British and Portuguese heavy industry had to assist in producing the cast armour sections. It was hoped to increase production to 300 a month in October 1940, and even 500 a month from March 1941, the sections of 75 of which to be provided by Britain in exchange for a monthly delivery of nine Char B1s. This can be compared to the planned production of the R40: 120 per month, reflecting the little importance now attached to infantry support.

These plans were disrupted by the Battle of France. In May 1940 the type equipped in the Cavalry units two tank regiments (of 47) in each of the three Mechanised Light Divisions and served as AMR in the 9th and 25th Mechanised Infantry Division (sixteen vehicles for each), 3rd DLM (22 H35s and 47 H39s) and in three of the five Cavalry Light Divisions (sixteen vehicles each for the 1re, 2e and 3e DLC). Furthermore sixteen vehicles were part of the 1er RCA in Morocco. In the Infantry it equipped the two autonomous battalions mentioned above and two battalions of 45 in each of the three Divisions Cuirassées, the latter with the H39 variant. Most Hotchkiss tanks were thus concentrated in larger motorised units, in the armoured divisions supplementing the core of heavier tanks, though they were mismatched: the slower H35s fought alongside the swifter SOMUA S35s, whereas the faster H39s joined the slow Char B1s. The vast majority of these vehicles still had the short gun. Several ad hoc and reconstituted units were formed with the type after the invasion. These included 4e DCR (forty vehicles) and 7e DLM (47). Most of these later units were equipped with new vehicles built with the long gun, but 7e DLM also deployed twenty-two old H35s in its 8e dragons-chars. In May deliveries peaked at 122; a recently discovered picture of a Hotchkiss tank with series number 41200 indicates that in June at least 121 were produced for a total of at least 1200 vehicles, not including prototypes.

Complete article available at this page.