Chevrolet Aveo (T200) Details, Photos and Videos

The Chevrolet Aveo (T200) (/əˈveɪ.oʊ/ ə-VAY-oh) is the first generation of the Chevrolet Aveo, a subcompact automobile from the Chevrolet division of the American manufacturer General Motors, launched in 2002, developed by the initially independent South Korean manufacturer Daewoo, later GM Korea. It was originally marketed as the Daewoo Kalos and prominently marketed as the Aveo. The model received the T200 internal codes during the car's development. The T250 code was designated for the model's facelift.

Designed, engineered and originally marketed by GM Daewoo, the Aveo superseded the Daewoo Lanos and was marketed worldwide in 120 countries under seven brands (Chevrolet, Daewoo, Holden, Pontiac, Ravon, Suzuki and ZAZ). In its home market of South Korea, the T200 was known as Daewoo Kalos, before being rebranded Daewoo Gentra. In several Asian, Australasian, and European export markets, the "Daewoo Kalos" name was also used, only to be later renamed "Chevrolet Aveo" or Holden Barina in the case of Australasia. Other names used include ZAZ Vida in Ukraine, Ravon Nexia in Russia, Chevrolet Nexia in Uzbekistan, Chevrolet Lova in China and Pontiac G3 in the United States, selling alongside the "Chevrolet Aveo" version. In Canada, the name Pontiac Wave was originally used, followed by Pontiac G3 Wave, before adopting the "Pontiac G3" name used in the United States. Since 2003, Suzuki has also sold a version in Canada as the Suzuki Swift+ alongside the Chevrolet and Pontiac badged versions. T200's successor, the T300 was released in 2011. The Swift+ was dropped after the 2011 model year due to poor sales along with the entire Suzuki brand, although Suzuki Canada lists 2010 as the final model year Swift+. In addition, the release of the Pontiac Wave5 is also very relevant to determine the difference of production years and production model names.

The Daewoo Kalos was introduced in 2002, based on a then-new Daewoo platform named T200, replacing the Daewoo Lanos (T100). Under development before Daewoo's bankruptcy, the Kalos was the company's first new model introduction following its subsequent takeover by General Motors. Manufacture of the Kalos began in early March 2002, with pre-production prototypes shown at the Geneva Auto Show in April 2002. The nameplate Kalos derives from the Greek word καλός (kalós) for "beautiful" and "good".

Designed by Italdesign, the Kalos derives directly from the Kalos Dream concept vehicle first presented at the 2000 Paris Motor Show and subsequent developmental concepts at the 2001 Frankfurt Motor Show, 2002 Geneva Auto Show, and 2003 at the Geneva Show. During this three-year development period Daewoo was struggling financially, with the ultimate fate of the company and the concept vehicle remaining uncertain.

Two different T200 front-end styling designs were sold. When released in 2002, the T200 headlamps were detached from the horizontal amber turn signal strip, located directly below. This detached style, used primarily in South Korea and North America, was used in conjunction with a semi-elliptical grille. When sales in Europe began in 2003, the headlights were an integrated unit that slanted upwards from the "V-shaped" grille towards the front fenders. In Australia, when the Daewoo Kalos was introduced in 2003, the hatchback featured the integrated lighting arrangement, with the detached style used to differentiate the sedans. In South Korea, where the detached lights were used at first, the integrated design was later utilized as a facelift.

The T200 sedan and five-door hatchback featured a swage line running along the lower body to the rear door, which kinks downward prominently on the five-door. Five-doors also feature a side window in the C/D pillar with a distinctively angled lower edge. Interiors feature a circular motif throughout. Upon introduction the initial European models carried an emblem reading "Design Giugiaro." Referring to his firm's design of the Kalos, Giorgetto Giugiaro said: "When we designed it, we set out to produce an alternative to conventional lines and tread new paths in terms of design."

The Kalos was sold in three available body styles: a 4-door sedan and 5-door hatchback from the beginning of production in 2002, and a 3-door hatchback available in certain European markets beginning in 2005. All body styles meet North American subcompact and European supermini or B-segment size classifications. The interior volume was 102.7 cu ft (2,910 L) (5-door) and 107.4 cu ft (3,040 L) (sedan) according to the EPA, meeting the minimum criterion for a compact vehicle despite being marketed as a sub-compact. Headroom was unmatched in its class at the time of its introduction. Per the German Verband der Automobilindustrie (VDA) standard, 5-door hatchbacks featured 175 litres (6.2 cu ft) of cargo space with the rear seats in their upright positions and 735 litres (26.0 cu ft) with the rear seats folded down, with a maximum payload rating of 495 kg (1,091 lb). Per U.S. Environmental Protection Agency (EPA) ratings, the 5-door hatchbacks featured cargo volume of 11.7 cubic feet (330 L) (rear seats up) to 42 cu ft (1,200 L) (rear seats down), with 7.1 cu ft (200 L) available in the sedan.

Daewoo's now disbanded Worthing Technical Centre in the UK conducted the initial research and platform engineering, with Daewoo's main Technical Center in Bupyong, Incheon, South Korea completing the majority of the later development programme. Daewoo engineers refined the chassis in Britain, on the proving ground at Motor Industry Research Association near Nuneaton, UK. Long-term testing covered nearly 2.2 million kilometers (1.4 million miles) with further testing outside South Korea on test sites in Arjeplog, Sweden; Granada and El Vendrell, Spain; Kapuskasing, Canada and Beijing, China. According to an April, 2003 GMDAT press release, Daewoo built 119 prototypes during the Kalos's design and development, crashing 31 for research and data-gathering purposes, and manufacturing 39 pilot production vehicles to verify standards and quality.

The body's sheet metal panel gaps were kept to 3 mm (0.1 in) and all but the roof panel were galvanized steel. 46% of the Kalos' underlying structural components were produced with high-strength steel, with tailor-welded blanks used in the production of the vehicle to put strength where needed while saving weight. The front suspension used MacPherson struts with offset coil springs and a stabilizer bar, while the rear featured a semi-independent torsion beam axle.

The body featured a drag coefficient of 0.35, with a frontal area of 2.16 m2 (23.3 sq ft) giving aerodynamic resistance of 0.74 m2 (8.0 sq ft). All Kalos iterations featured high H-point seating within a relatively narrow, short and high-roofed body that combined a long wheelbase with short front (81 cm or 32 in) and rear (49 cm or 19 in, hatchback) overhangs to maximize the outward visibility, interior space and maneuverability for the vehicle's footprint. Rear seat H-points are higher in all body types, giving the car theatre seating.

The Aveo has generally not been rated highly by consumer agencies and automotive reviewers. The Insurance Institute for Highway Safety reported in 2011 that "The Aveo does poorly in IIHS crash tests and receives the second lowest score of Marginal in roof strength, side impact and rear crash tests. It receives a higher score of Acceptable in front offset tests." The relatively high profile of the hatchback model, in particular, makes it susceptible to crosswinds and degrades handling somewhat.

The Kalos models have been tested in at least four international New Car Assessment Programs, the results reflecting varying equipment and the differences in the tests themselves. Based on market priorities and price point control, some safety equipment is either unavailable or available only as extra-cost options (including side airbags, ABS, foglights and a rear center position three-point seatbelts and headrests.)

South Korea: models received four stars for both driver and front-seat passenger in crash tests conducted by the Korean Automobile Test and Research Institute (KATRI).

Europe: models received the following European New Car Assessment Program (Euro NCAP) ratings:

Australia: Holden Barina models received scored 2 stars (of 5) from Australasian New Car Assessment Program (ANCAP), a rating that is lower than the previous European-built, Opel-based Barina had scored, and the lowest ANCAP rating since 2004. Notably, the Australian Barina models do not feature the front-seat mounted side airbags offered in other markets (e.g., USA), nor are the ANCAP ratings directly comparable to the ratings of other NCAP programs.

A revised sedan was introduced in April 2005 at the Shanghai Motor Show, designed in cooperation with the Pan Asia Technical Automotive Center (PATAC). Bearing the internal code T250 and sold in South Korea as the "Daewoo Gentra", the revision comprised primarily interior and exterior styling changes, a new interior instrument panel and minor equipment changes, including increased sound deadening. Incorporation of the radio antenna into the rear glass and extensive wind tunnel testing helped reduce the coefficient of drag from 0.348 to 0.326. It was subsequently launched in Europe in September 2005 at the Frankfurt Motor Show.

A restyled hatchback with the sedan's updated instrument panel was presented as the Chevrolet Aveo during the 2007 Frankfurt Motor Show, to be marketed in Europe and North America. The Korean market's restyle of the hatchback, the Gentra X, featured a less distinct/more "normal" grille treatment that formed the basis for the Holden, Pontiac and Suzuki-branded variants.

Later iterations, including the Kalos, Aveo, Barina and Gentra sedans, the Gentra X hatchback and the 2007 "Frankfurt Show" hatchbacks were styled in-house and with the assistance of PATAC, and depart notably from the original Giugiaro exterior and interior styling designs.

With launch of the Gentra X in South Korea, GMDAT had replaced engines of T250. 1.2 L S-TEC II inline-four engine was updated with features such as dual overhead camshaft (DOHC) and timing chain (older version has timing belt) system. 1.6 L E-TEC II engine had replaced with ECOTEC (GEN-III) engine with new features such as variable valve timing mechanism.

US Aveo safety features include available four-channel, four-sensor ABS system with electronic brake force distribution (EBD), and front (dual-stage) and side air bags for front row occupants with a passenger-sensing system. Beginning with 2008, Aveo standard equipment includes a tire pressure monitoring system.

Complete article available at this page.