Sunday, August 18, 2019

author photo

91PlymouthGrandVoyagerLE.jpg

The second-generation Chrysler minivans are a series of minivans that were manufactured and marketed by Chrysler Corporation in North America and Europe from 1991 to 1995. Officially designated the AS platform by Chrysler, the second-generation minivans were an extensive revision of the first-generation chassis and body. As before, passenger and cargo configurations were sold by Dodge, Plymouth, and Chrysler divisions. The first minivans offered with driver-side airbags (in 1991) and with optional integrated child safety seats (in 1992), the second-generation Chrysler minivans offered all-wheel drive as an option for the first time; a manual transmission would be offered for the last time.

As with its predecessor, Chrysler assembled second-generation minivans at Windsor Assembly in Windsor, Ontario, Canada, with additional production at Saint Louis (North) Assembly in Fenton, Missouri from 1990 to 1994. In 1992, to supplement exports from the United States, the Chrysler Voyager and Dodge Mini Ram Van began production in Graz, Austria (in the Eurostar joint venture factory between Chrysler and Steyr-Daimler-Puch).

For the 1996 model year, the AS-generation minivans were replaced by the NS platform, marking the first complete redesign of the Chrysler minivans since their 1984 introduction.

Introduced in November 1990, the second-generation Chrysler minivans were marketed by the Dodge, Plymouth, and Chrysler divisions. The Dodge Caravan and Plymouth Voyager nameplates returned, with both short-wheelbase and long-wheelbase (Grand) body configurations. As with the first-generation minivans, base-trim examples were equipped with 5-passenger seating, with 7-passenger seating as standard in higher-trim versions (SE, LE, ES/LX, and all Town and Country vans).


For 1994, the model range underwent a mid-cycle revision, primarily intended to comply with 1998 upgrades to US federal safety standards for cars (although the entire model range was officially considered a light truck). Alongside minor exterior styling changes, the minivans were given dual airbags, four-wheel disc brakes with ABS, and side impact beams in the front and sliding doors. In another set of revisions, Chrysler sought to make the vans quieter, improving fit and finish.

The second-generation Chrysler minivans are officially designated the Chrysler AS platform (matching the Chrysler shift to two-letter platform designations in 1990). Largely a substantial revision of the first-generation S-platform minivans, the AS chassis retained the 112.0 inch wheelbase for standard-wheelbase vans and 119.1 inches for extended-wheelbase "Grand" vans. While structurally unrelated to the (discontinued) Chrysler K-cars, the second-generation minivans shifted mechanical commonality towards its larger derivatives, adopting engines and transmissions from the Chrysler AA platform (Dodge Spirit/Plymouth Acclaim) and the Chrysler AC/AY platform (Chrysler New Yorker/Fifth Avenue/Imperial and Dodge Dynasty).

Retaining the unibody construction of the first-generation minivans, the second-generation minivans are fitted with a MacPherson strut front suspension with coil rear springs; all-wheel drive versions have 4-wheel independent suspension with a leaf-sprung rear axle. During the development of the platform, attention was paid on refining the handling over the first-generation vans, in order to improve stability, maneuverability, and steering feel.

For 1991 to 1993, a disc front/rear drum brake configuration was utilized, with a four-wheel disc brake system introduced in 1994. All versions were fitted with anti-lock brakes.

With the lone exception of the Chrysler 2.5L Turbo I inline-4, the second-generation minivans returned the powertrain from their 1990 predecessors. The standard engine was a naturally-aspirated Chrysler 2.5L inline-4, producing 100 hp; this engine was standard on standard-wheelbase passenger vans and all cargo vans. A Mitsubishi-produced 3.0L V6 (producing 142 hp) was an option on short-wheelbase vans. Introduced in 1990, the Chrysler 3.3L V6 (producing 150 hp; increased to 162 hp in 1994) was standard on all Grand Voyagers/Grand Caravans, Town and Countrys, and vans with all-wheel drive; the 3.3L V6 was offered on short-wheelbase as a second option.

For 1994, the AS-platform minivans adopted the 3.8L V6 engine from the Chrysler Imperial. A larger-bore version of the 3.3L V6 tuned for additional torque output, while producing the same 162 hp of the 3.3L V6, produced 213 lb-ft of torque. The standard engine of the Chrysler Town and Country and all-wheel drive vans, the 3.8L engine became an option on the Grand Voyager/Grand Caravan.

Initially deleted from the model line for 1991, the 5-speed manual transmission made a return for 1992 through 1994 on base-trim or cargo vans. The 2.5L engine was available with a 3-speed TorqueFlite automatic, along with the 3.0L V6. The 4-speed Ultradrive overdrive automatic transmission was fitted to both the 3.3L and 3.8L V6 engines.

In an extensive redesign, the second-generation minivans featured a major revision of the exterior, lowering the exterior coefficient of drag from 0.43 to 0.39. While the styling changes were largely evolutionary, the only shared body panels from the first-generation vans were the front doors and the sliding door.

The front fascia saw the largest degree of change, with redesigned front fenders allowing for a lower hoodline. Introduced in 1987, composite headlamp units made their return, wrapping into the front fenders. With the lower hoodline, a smaller grille was used. As part of the model change, stylists sought to differentiate the three model ranges from each other. The Plymouth Voyager was given chrome-trimmed headlights and a sleeker version of its 1987-1990 grille; the Dodge Caravan was given headlamps without chrome trim and adopted the Dodge divisional four-segment grille for the first time. The Chrysler Town and Country shared its headlamps with the Plymouth Voyager with a model-specific waterfall-style grille. In an effort to lessen rust and improve fit and finish, front and rear bumpers were redesigned, with wraparound plastic bumpers replacing steel and rubber-ended bumpers.

For 1991, the exterior door handles were carried over from the 1984-1990 vans; for the 1992 model year, the door handles were replaced by a larger design, fitted flush with the body.

In line with the front fascia, the rear fascia underwent several major changes, with the rear liftgate redesigned. In addition to rounded edges to improve aerodynamics, the liftgate added a larger rear window and a center/third rear brake lamp; the rear window wiper was updated to feature intermittent modes.

In addition to the extensive exterior changes, the interior saw a complete redesign; as with the previous generation, the Dodge Caravan and Plymouth Voyager shared nearly identical interiors (across comparable trim levels). Coinciding with the addition of a driver-side airbag, the dashboard was reconfigured, placing many primary and secondary controls within closer reach of the driver. Dodge and Plymouth vans were offered with two different analog instrument panels, with the Chrysler Town and Country fitted with a digital instrument panel. For the first time, a glovebox was added to the dashboard (the underseat storage drawer made its return).

The 1991 redesign adopted the seating configurations offered on the 1989-1990 vans. While 5-passenger seating remained available on base-trim vans, 7-passenger seating became standard for all SE and LE-trim vans (regardless of wheelbase). To meet federal safety standards, all outboard seating positions were fitted with 3-point seatbelts. The Chrysler Town and Country (in line with other high-content minivans) shifted from a second-row bench seat to second-row bucket seats as part of the redesign. Marketed as "Quad Command" seats, the configuration was available on higher-trim (LE and LX/ES) Dodge and Plymouth vans. For 1992, for vans with second-row bench seats, Chrysler introduced integrated child safety seats as an optional feature. For 1994, the integrated child safety seats were modified, allowing for a recline position (closer to a standard carseat).

From the first-generation minivans, Chrysler carried over the previous trim levels essentially unchanged (the Mini Ram Van was replaced by the Dodge Caravan C/V, although the nameplate continued to be used in the Netherlands). Although once a distinguishing feature of the Chrysler minivans in the 1980s, simulated woodgrain trim began to fall out of favor in the 1990s. In 1992, woodgrain became a delete option from the Chrysler Town and Country and removed entirely from the Dodge Caravan for 1994.

As part of the 1994 model revision, the liftgate badging was changed from a stamped silver-on-black badge to a smaller embossed silver font; this was the first change to badging since 1984. Chrysler Town and Country versions retained their script-style badging.

As part of the introduction of the second-generation minivans, the Chrysler Town and Country became a permanent member of the minivan model range, intended as its flagship. Produced only in the long-wheelbase body configuration, the Town and Country was equipped with woodgrain trim, body-color mirrors, and alloy wheels; the Town and Country is the only version of this generation produced with a digital instrument panel. As with its Chrysler New Yorker and Imperial counterparts, the Town and Country was fitted with a crystal Pentastar hood ornament. Along with tufted leather interior trim, the Town and Country was fitted with "Quad Command" seating, replacing the second row bench seat with bucket seats matching those of the front row.

Chrysler minivans (AS)


Complete article available at this page.

your advertise here

This post have 0 komentar


EmoticonEmoticon

Next article Next Post
Previous article Previous Post

Advertisement

Themeindie.com