Tuesday, July 30, 2019

author photo

2001 Daewoo Lanos (T150) Sport 3-door hatchback (2010-06-17) 01.jpg

The Daewoo Lanos is a subcompact car produced by the South Korean manufacturer Daewoo from 1997 to 2002, and thereafter produced under license agreements in various countries worldwide. It has also been marketed as the Daewoo Sens, ZAZ Sens and ZAZ Lanos in Ukraine, Doninvest Assol and ZAZ Chance in Russia, FSO Lanos in Poland, or Chevrolet Lanos in Ukraine, Russia, and Egypt.

It was designed by Giorgetto Giugiaro and initially featured three body styles: three-door and five-door hatchbacks and a four-door sedan. The Lanos was designated the T100 model code at launch; the T150 code applies to the updated models introduced in 1999. In 2006, a panel van version, developed in Ukraine by ZAZ, was also introduced. The Daewoo Lanos was designed to replace the Daewoo Nexia in the Daewoo line-up and was itself replaced by the Daewoo Kalos.

In 1992, Daewoo dissolved its joint-venture with General Motors, and simultaneously a decision was made to independently develop replacements for the contemporary Daewoo Motors products, based on older General Motors models. The Lanos development programme was formally started in autumn 1993, with the goal to create a car to replace Daewoo Nexia as Daewoo's small family car.


The project began with a comparative study of competing models from 20 different manufacturers, with Toyota Tercel, Opel Astra and Volkswagen Golf identified as most competitive. Four design studios were commissioned to deliver clay models presenting their ideas for the new model's styling. Giorgetto Giugiaro's design was chosen, and Italdesign was commissioned to develop the car's final outside and interior styling. The technical side of the project was conducted simultaneously by Daewoo's development centre Korea, as well as suppliers and contractors who were involved in developing particular components. This included AC Rochester (engine components), Delco Chassis Division (brakes, including ABS), GM Powertrain (automatic transmission), Italdesign (body, structural analysis, electrics, prototype construction), PARS Passive Rückhaltesysteme GmbH (airbags) and Porsche (vehicle concept – research, structural analysis, suspension and brake components, and experimental production supervision).

By the end of 1995, 150 prototypes were built (providing for three body styles). The development programme involved extensive testing in a multitude of locations. Safety tests included high-speed stability and durability testing in England, and brake testing on the Großglockner in Austria. Low-temperature testing was conducted in Canada, Sweden (Arjeplog), and Russia (Moscow, Khabarovsk) while high-temperature tests took place in the US (Death Valley), Oman (Nizwa), Australia (Alice Springs), Spain (Barcelona), and Italy (Nardò). The programme was completed in a remarkable time of only 30 months from the approval to the commencement of large-scale production of the Lanos sedan for the Korean market. European-market production began in 1997.

The cars were equipped with E-TEC I4 with single cam and twin cam engines ranging from 1.5 L (1498 cc 86HP) SOHC to 1.6 L (1598 cc 106HP) DOHC. In the UK and many countries of Europe (like Italy, France or Austria) there are also E-TEC models 1.4 (1349 cc 75HP) and 1.6 (1598 cc 106HP). The suspension is built upon that of a Daewoo Nexia, as used in Vauxhall/Opel Astra Mk2 GTE.

On the mechanical side, all Lanos versions shared the same parts with a few exceptions. Differences between the 1.6 DOHC engine version and the other versions were:

The four models available were S, SE, SE Plus, SX, and later, the SPORT model. The S was the base model and did not include many standard features (like a CD player or power windows). The SE was just a small step up from the S base model. However, the SX model usually included a CD, radio, and cassette player along with power windows, a power side mirror, and fog lights. A few select SX models even came with a sun-roof, though not many did. In the Lanos's later years, the SE and SX models were dropped and replaced with a new trim line called the SPORT (2001–2002). The SPORT included several features similar to the SX, but also included red/black leather seats and a metallic silver dash trim. Also, the SPORT model had window controls located on the doors rather than the center console (like in the previous trim lines).

Outside South Korea, the Lanos has been produced in Poland (from 1997 to 2008), Ukraine (from 1998 to present), Russia (briefly produced, starting in 1998), Egypt (from 1998 to present) and Vietnam (from 2000 to 2006). Most of the initial production was made using complete knock down (CKD) kits, which were supplied to FSO (in Poland), ZAZ (in Ukraine), TagAZ (in Russia), Daewoo Motors Egypt and GM Egypt (in Egypt) and VIDAMCO (in Vietnam).

From 2002, ZAZ equipped some of the kits with a domestic MeMZ-307 engine and sold this version under the Daewoo Sens name; this practice continues with the start of full-scale production of model T150. In December 2004, ZAZ adopted the Lanos chassis for full-scale production and installed new welding and painting lines. From March 2009, the updated version is called ZAZ Lanos (internal model T150). The engines are still supplied by GM Daewoo, although a Chinese-developed engine from Chery Automobile has been fitted and there are plans to build the 1.6 L engine at the MeMZ plant.

In Poland, the Fabryka Samochodów Osobowych (FSO) plant in Warsaw began the production of the Lanos in 1998. Since January 2005, after the takeover of Daewoo by General Motors, the Lanos produced in Poland started to be sold under the brand name of FSO. It was produced until 2008, but only with the pre-facelift external design.

In 2005, General Motors contracted with ZAZ to provide Ukrainian-assembled Lanos models for the Ukrainian and Russian markets, to be imported duty-free, thanks to an international agreement, and sold through the GM dealer network. Sales of the Chevrolet Lanos sedan commenced in Russia in November 2005. The Chevrolet brand was utilized to compete effectively with the Renault Logan. From July 2009, it is marketed in Russia as ZAZ Chance.

In 2006, a panel van variant of the ZAZ Lanos was introduced.

Since late 1998, the Daewoo Motor Egypt factory in Cairo started the assembly of the Daewoo Lanos in both 4 door and 5 door shells with the 1.5 SOHC engine. The hatchback version was called "Juliet". The 4 door was available in two versions:

The 5 door version of the Lanos (AKA Juliet) came with full options and manual transmission.

Near the end of year 2000 the Lanos was introduced with a different rear end design and a face lifted front (different front bumper and grill). It was called "Lanos II" in this particular market. An SE version came with all the options plus the manual transmission. The automatic transmission version was stopped shortly after the introduction of the "Lanos II".

Between mid 2000 and 2001 the factory produced an even more frugal 4 door version of the Lanos II with no options at all but a cassette and those were sold by the Egyptian ministry of defense to army officers with a decently low price compared to the car's value at that time.

The facelifting also included the five-door Juliet to have the same changes as the 4 door version on the front but on the rear it only had a different design tail-lights and bumper rather than a wholly different design rear end like the sedan, the production of the Juliet stopped within 2005.

In November 2008, GM Egypt started producing the Chevrolet Lanos in 6th of October City, from Ukrainian supplied kits.

Daewoo Lanos


Complete article available at this page.

your advertise here

This post have 0 komentar


EmoticonEmoticon

Next article Next Post
Previous article Previous Post

Advertisement

Themeindie.com